Advertisement
Quick Links
Advertisement
Related Manuals for Blaupunkt TPMS 1.0
Summary of Contents for Blaupunkt TPMS 1.0
- Page 1 TIRE PRESSURE MONITORING SYSTEM TPMS 1.0 Operating & Installation Instructions...
- Page 2 SPECIFICATION Sensor Operating frequency 433.92MHz Battery voltage 1.8V ~ 3.3V Battery lifetime 1-year Operating temperature -20°C ~ 60°C Pressure range 0~3.5 Bar / 0~50 PSI Display Operating frequency 433.92MHz Operating voltage 12 +/- 3V Operating temperature -20°C ~ 70°C Default value High pressure value 3.0 Bar / 43 PSI Low pressure value...
- Page 3 DISPLAY Set Button Cigarette Plug Data Display Pressure Unit Warning Display SENSOR Sensor Cover Battery Sensor Rubber Seal Washer Hex Nut...
-
Page 6: Unit Switching
SETTING HIGH PRESSURE VALUE SETTING LOW PRESSURE VALUE SETTING Press & hold setting button “ ”. Press & hold setting button “ ”. After entering the setting interface, press setting button “ ” After entering the setting interface, press the right button “ ”, for high pressure value setting, the rst number will ash, then then press the setting button “... -
Page 7: Troubleshooting
Drive has responsibility to maintain tires regularly. Driver should react promptly once warning from this unit alerted. Blaupunkt does not guarantee or assumes liability for the loss of sensors. All sensors in this unit have been pre-set individually for each tire in the factory. - Page 8 Designed and engineered by Blaupunkt 1 311 18 001 23 01...