If a problem occurs ...
Problem
Sound
distorted
Sound
muffled,
spatial
Possible cause
Wrong input sensi-
tivity setting or
wrong pre-amplifi-
cation of the sub-
sequent amplifier
Wind influence
Plosives
Structure-borne
noise transmission
Pick-up pattern has
been ignored
Possible solution
Reduce the input sensitiv-
ity or pre-amplifiaction of
the subsequent device so
that sufficient gain
reserve remains.
Use a suitable windshield
(see page 10).
Use a suitable popshield
(see page 10).
Use a suitable shock
mount (see page 7).
Check if the microphone is
spoken into from the cor-
rect side. Make sure that
the Sennheiser logo or the
slanted front of the sound
inlet basket faces your
body.
MK 4
| 15