Download Print this page
Coleman QUICKPUMP Instructions For Use

Coleman QUICKPUMP Instructions For Use

220-240v
Hide thumbs Also See for QUICKPUMP:

Advertisement

Quick Links

220-240V QUICKPUMP™
UNIT INSTRUCTIONS
(Photo may vary from actual product.)
Warning
• Children should be supervised to ensure that
they do not play with the appliance. This
appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Cleaning and user maintenance shall not be
made by children.
• READ AND SAVE THESE INSTRUCTIONS.
• Follow the instructions carefully on articles
to be inflated, never exceed recommended
pressure. Bursting items can cause serious
injury.
• To reduce the risk of fire for electric shock, do
not use this pump with any solid-state speed
control device.
• Do not use under wet conditions. Keep away
from water.
• Never look into or point any opening toward
your eyes while pump
is operating.
• Do not attempt to put any objects into the
inflation or deflation port at any time.
• Never leave pump unattended while in use.
• Do not leave pump connected to the power
supply when not in use.
• Never twist the cord.
• Never allow sand, paper, debris or small
articles to be sucked into pump while
operating.
• Let pump cool before storing the pump inside
the box after use.
• Allow pump to cool for 30 minutes after each
10 minutes of continuous operation.
• Do not attempt to defeat this safety feature.
• Unplug or disconnect the appliance from the
power supply before servicing.
• Do not operate any pump with a damaged
cord or plug. Discard pump or return to an
authorized service facility for examination
and/or repair.
• Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or similar
coverings. Arrange cord away from traffic
area where it will not be tripped over.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or similar qualified person in order to
avoid a hazard.
DO NOT EXCEED 10 MINUTES OF
CONTINUOUS OPERATION. ALLOW
30 MINUTES OFF BETWEEN EACH
OPERATION.
CAUTION: Do not block the air portals
during operation, this could damage the
motor.
Things You Should Know
• Carefully inspect the pump for damage before
first use and every use thereafter. Do not use
if found damaged.
• Check the plug pins and cable if these are
damaged do not use. The supply cord cannot
be replaced. If the cord is damaged the
appliance should be scrapped.
• Do not change the plug in any way.
• Power supply must be 220-240 volt AC.
• Keep unit out of reach of children.
• Do not expose to rain or sunlight. Household
use only.
• This pump is a high-volume, low-pressure
pump. It is intended to inflate items requiring
low pressure (such as inflatable beds,
inflatable rafts, air mattresses, etc.).
• For fast inflation and maximum motor
cooling, always use the largest size nozzle
possible.

Advertisement

loading

Summary of Contents for Coleman QUICKPUMP

  • Page 1 • Never allow sand, paper, debris or small articles to be sucked into pump while operating. • Let pump cool before storing the pump inside 220-240V QUICKPUMP™ the box after use. UNIT INSTRUCTIONS • Allow pump to cool for 30 minutes after each 10 minutes of continuous operation.
  • Page 2 ® with pump nozzle. This will seal the internal QuickPump™, Double Lock™, QuickBed™ and Wrap ‘N’ Roll™ are trademarks of The Coleman Company, Inc. yellow stopper and keep air from escaping while closing cap. Gently twist adapter sleeve to right while backing pump out of valve.