Saving Settings And Restarting Your Gateway - Intel II User Manual

Saving settings and restarting your gateway

Step-by-step
It's a good idea to print your new settings and keep them
handy for reference. For details, see Printing your
gateway settings on page 25.
Each time you click Save/Next after making a change in
any of the Setup Wizard screens, the change is instantly
applied to the gateway firmware in Read Only Memory
(ROM). But when you click Save & Restart, your gateway
mode (Gateway Mode or Access Point Mode) hardware
is restarted and all changed values in ROM are
transmitted to the network. Only then is your gateway
fully operational.
1 From your main Wireless Gateway screen, click
Setup Wizard.
2 In the left column under the Setup Wizard, click Save
& Restart.
The following appears.
3 Click Apply.
You'll see a message telling you that your system is
resetting. After the gateway sends the values to the
network, you see the main Wireless Settings screen,
and your new settings are applied.
Chapter 3 – Changing the Gateway Settings
37