PC Engines WRAP User Manual page 22

J13 USB option
This header is not populated. To use USB, WRAP.1C must be modified for 5V input through the
DC jack (POE not possible). A BIOS update is also required. The USB adapter board connected to
this port should include USB filtering and a current limiter such as a Polyfuse. Please contact PC
Engines for details if required.
1 VCC
2 VCC
3 USB3-
4 USB1-
5 USB3+
6 USB1+
7 GND
8 GND
9 USBOVR#
10 GND
WRAP router platform
+5V supply
+5V supply
USB channel 3, negative
USB channel 1, negative
USB channel 3, positive
USB channel 1, positive
ground
ground
overcurrent (can be left open, pulled up by 10K resistor)
ground
22 2/13/2007