Turning on the system
Connect the AC power cord
(supplied) to the AC IN jack on
the rear of the unit, and then
to the wall outlet.
AC power cord (supplied)
To wall outlet
The system is turned on in the
demonstration mode and the
demonstration starts automatically.
Press to turn on the system.
The indicator lights up in green.
The system can be used with the built-in
battery instead of connecting the AC power
cord (supplied) to a wall outlet if you have
charged the battery before use. For details,
see "Charging the battery" (page 11).
Deactivating the demonstration
Hold down W.PARTY CHAIN
LIGHT for more than 3 seconds
while the demonstration is
The demonstration ends and the
system enters the standby mode.
When you hold down W.PARTY CHAIN
LIGHT during the standby mode, or
when you disconnect and reconnect
the AC power cord, the system enters
the demonstration mode.
Carrying the system
Before carrying the system, disconnect
all the cords.
Correct hand placement while carrying the
system is very important to avoid personal
injury and/or property damage.
• By d