Maintenance And Troubleshooting; Replacing The Cordless Handset Battery - Sharp BB-HC1 Operation Manual

Hide thumbs Also See for BB-HC1:
Table of Contents

Advertisement

4. Maintenance and Troubleshooting

Replacing the Cordless Handset Battery

Like any other battery, the rechargeable battery will eventually wear out. The
battery can normally be used for about two years, although this will vary
depending on the conditions of use.
If LOW BATTERY continues to appear in the cordless handset display after
the battery has been charged for 10 hours, replace it with the following
battery:
Replacement battery: Use only a Sharp UX-BA01 battery
(3.6 V Ni-MH battery, capacity: 850 mAh)
Caution:
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
1
Remove the battery cover by pressing
on the indentation as shown.
2
Unplug the battery connector and
remove the old battery.
3
Connect the battery connector
battery in the cordless handset, placing the wires as shown.
of the new battery, and then place the
Black
Red
Red
Black
29

Advertisement

Table of Contents
loading

Table of Contents