Installing And Charging The Battery - Sharp BB-HC1 Operation Manual

Installing and Charging the Battery

Installing and Charging the Battery
1 1
Connect the battery connector ( Connect the battery connector
the cordless handset (
•
Place the wires as shown.
2
Place the battery cover on the cordless
handset, making sure it snaps firmly
into place.
•
Make sure that the wires are not caught
or pinched by the cover.
3
Place the cordless handset in the base
with the dial pad facing forward.
•
Important! The dial pad must face
forward, or the battery will not charge.
•
The battery charges automatically while
the cordless handset is in the base.
While charging, the display shows
CHARGING.
•
The cordless handset and base may
feel warm while charging. This is
normal.
Note: The battery cannot be overcharged. When not using the cordless
handset, keep it in the base to ensure that it is always charged.
8
–)
þ
—
).
Black
Red
Red
Black
, and then place the battery pack in
Charge the battery
at least
the first time!
10
hours