Bow Cover (If Equipped) - Bayliner 190 Bowrider Owner's Manual Supplement

Bow Cover (If Equipped)

1. Snap the two forward snaps (A) to the deck.
2. Snap the bow cover to the entire port side.
3. On the starboard side, only snap the forward half of the bow cover to the deck.
4. Insert the adjustable, center support pole (B) into both the bow cover and the table base (C).
5. Adjust the support pole so that it is just high enough to stay inserted in the bow cover.
6. Snap the rest of the bow cover to the deck.
7. Adjust the support pole to take any slack out of the bow cover.
160/170/180/190 Bowriders • Owner's Manual Supplement
33