Function Of The Buttons For Music Playback; Telephone Functions - Silvercrest SKBL 56 A1 Manual

The next time you turn on the speakers, they will connect automatically to each
other. To unpair the speakers, proceed as follows.
If you want to connect the speaker to another Bluetooth
first unpair the current Bluetooth
button and the
about 2 seconds until you hear a beep. Alternatively, you can terminate the
connection on your Bluetooth
a beep.

Function of the buttons for music playback

Button
► Press briefly to play/pause the music .
► Press and hold until you hear a beep to turn the speaker
on or off . The device must be paired with your
Bluetooth
■ 10
│ US-EN
IB_282774_Bluetooth_SKBL56A1_LB9.indb 10
® device, you must
® device. To do this, hold down the
button ( ) of the affected speaker for
® device. In this case, you will also hear
Function
® device again before you can reuse it .
Button
► Press briefly to increase the volume . When you reach the
maximum volume, you will hear a brief tone .
/
► Press and hold for approx . 2 seconds to jump to the next
track .
► Press briefly to decrease the volume . When you reach the
minimum volume (mute), you will hear a short beep .
► Press and hold for 2 seconds to jump back to beginning of
/
the current track . Within 2 seconds, press and hold again
for 2 seconds to jump to the previous track .
► Press and hold both buttons at the same time for about
& 2 seconds to activate or deactivate the Bluetooth
connection . When the Bluetooth
/
the two speakers connect automatically (
( )

Telephone functions

If you use a smartphone as your Bluetooth
■
playback will be paused when there is an incoming call .
■ Acceptance/termination of the call can be carried out via the smartphone
or the speaker . The sound is played on the device speaker .
Function
®
® function is activated,
) .
® playback device, the audio
SKBL 56 A1
16.01.17 11:27