Powering Options - Sennheiser SH350 Instructions For Use Manual

Powering options

There are three options for powering the NoiseGard™ active noise compensation:
1. Connection to the on-board system (12–35 V DC)
2. Connection to the BP-04 battery pack
(accessory, except for HMEC 352, HMEC 355 and HMEC 356)
3. Connection to the cigarette ligther socket (12–35 V DC) via adapter cable
(accessory, except for HMEC 352, HMEC 355 and HMEC 356)
The supply voltage for the NoiseGard™ system is processed by the in-line electronics in
the connecting cable.
Danger of short circuit!
Before turning on NoiseGard™, ensure that the on-board power supply system is
protected by a 1 A fuse.
13