What's In The Box; Installation; Rack Mounting - QSC MP-A Series User Manual

What's in the Box

(1x)
MP-A20V
MP-A40V
MP-A80V
MP-A20V (x2)
MP-A40V (x4)
MP-A80V (x8)

Installation

Rack-Mounting
The MP-A amplifiers measure (HWD) 1.75 in x 19 in x 14.8 in (44 mm x 483
mm x 377 mm) and can be mounted into 1RU of a rack using four screws in
front, and four screws in the rear with the appropriate rear mounting support.
Ventilation
• The unit is cooled by a variable speed, thermally controlled fan which runs
faster as the temperature rises.
NOTEE: The MP-A Series of amplifiers are designed to
maintain proper operating temperatures utilizing convection
cooling via the aluminum chassis for typical background music
loads. The variable speed cooling fan(s) are thermally regulated
and operate only during sustained high power output levels and/or
high ambient temperature environments.
• It is recommend that you provide 1RU (1.75 in / 44.45 mm) space above
the amplifier.
• Minimum open space of 3 inches measured from back of amplifier.
NOTEE: QSC System Power Amplifiers contain advanced protection circuitry which allows them to reduce output power in order
to maintain safe operating temperatures. Insufficient ventilation may result in the amplifier reducing output power during normal
operation (indicated by Limiter/Protect LEDs illuminating red). To reduce the possibility of thermal limiting, and allow proper heat
dissipation, we recommend that you keep the space directly above and to the rear of these amplifiers free of obstacles.
TD-001572-01-A
(1x)
AC
Cord
(1x)
Warranty TD-000453
MP-A20V (2x)
MP-A40V (4x)
MP-A80V (8x)
Inputs (3-Pins)
(1x)
Safety
Information
TD-000337
4
(1x) MP-A20V (1x)
MP-A40V (2x)
Remote
MP-A80V (4x)
(5-pins)
(1x)
Quick Start
Guide
TD-001507
— Figure 1 —
Outputs
(4-Pins)