Searching For A Sound Source; Adjusting The Balance - Sennheiser Set 830 S Instruction Manual

Searching for a sound source

Switch the receiver on.
Do you hear the desired sound source?
Yes: The receiver has already found the sound source.
1
5
Channel
indicator
If you still haven't found your sound source, press the
channel search button once more.
You cannot find your sound source?
Read the chapter "If a problem occurs ..." on page 23.
Note:
The channel indicator
that the light won't disturb you in a dark room.

Adjusting the balance

4
No:
Briefly press the channel search
5
button .
The sound source is searched for.
On the receiver, the channel indi-
1
cator can light up as follows:
Frequency
2.3+2.8 MHz
2.3 MHz
2.8 MHz
goes off after 30 seconds so
The balance control allows for right/left
volume adjustment. Adjust the balance
so that you hear equally well with both
ears.
Turn the balance control
left L or right
volume for the corresponding ear.
Using the Set 830 S
You hear
the sound in
stereo
mono
4
R in order to increase the
to the
15