Related Manuals for IRIS Spreaders VIKING-2000
Summary of Contents for IRIS Spreaders VIKING-2000
- Page 1 FERTILIZER SPREADER Dry fertilizer Spreader for tractor - Mod. VIKING MODEL OPERATOR'S MANUAL & Please Read this operator's manual before operating the machine...
-
Page 2: Table Of Contents
- INDEX - 1. Introduction ..................1 2. Technical data ................... 2-4 3. Terminology ..................5 4. Operation ....................6-7 5. Important safety information ..........8-9 6. Checkup ....................10 7. Storage ....................10 8. Trouble shooting ................11 9. Parts sales & After service ............ -
Page 3: Introduction
7) Conveys exact power by using a steel mesh wheel, without causing a sip from the wheel. 8) Tandem axle (VIKING-8000, 8000W, 10000, 10000W) Single axle (VIKING-2000, 3000, 4000, 4000W, 6000, 6000W) 9) Tandem axle available for VIKING-6000,6000W 10) Amount of fertilizer can be controlled in the tractor by using the switchgear of oil hydraulic cylinder. -
Page 4: Technical Data
2. Technical date Model VIKING-2000 VIKING-3000 VIKING-4000 VIKING-4000W 1.8㎥ 2.7㎥ 3.6㎥ 3.6㎥ Hopper Capacity 2ton 3ton 4ton 4ton Nominal Capacity Weight of 1135 1185 1450 1630 the Machine(㎏) 2250 2250 2360 2360 Width(㎜) 1570 1795 2115 2115 Height(㎜) 4326 4326... - Page 5 Model VIKING-6000 VIKING-6000W VIKING-6000T VIKING-6000WT 5.3㎥ 5.3㎥ 5.3㎥ 5.3㎥ Hopper Capacity 6ton 6ton 6ton 6ton Nominal Capacity Weight of 1760 1940 1910 2090 the Machine(㎏) 2460 2460 2460 2460 Width(㎜) 2450 2460 2450 2460 Height(㎜) 4810 4845 4810 4845 Length(㎜) Feed Mesh Chain Width(㎜) Disc Size(mm)
- Page 6 Model VIKING-8000 VIKING-8000W VIKING-10000 VIKING-10000W 7㎥ 7㎥ 8.7㎥ 8.7㎥ Hopper Capacity 8ton 8ton 10ton 10ton Nominal Capacity Weight of 2380 2560 2470 2650 the Machine(㎏) 2500 2500 2500 2500 Width(㎜) 2430 2400 2680 2670 Height(㎜) 5540 5575 5540 5575 Length(㎜) Feed Mesh Chain Width(㎜) Disc Size(mm)
-
Page 7: Terminology
3. Terminology VIKING MODEL ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ⑨ ➀ Extension Hopper ➁ Stainless Hopper ➂ Hopper Brace ➃ Hydraulic Motor ➄ Steel Mesh Wheel ➅ Spreading Disc ➆ Drawbar ➇ Tire ⑨ Frame - 5 -... -
Page 8: Operation
4. Operation 1) Connect and fix the pintle behind the tractor with the pintle. on the front of the fertilizer distributor with a pin. 2) Connect the pin plug of oil hydraulic motor and pin plug of the steel mesh wheel driving cylinder to the pin plug socket of the tractor. 3) Check if the shutter is closed and load fertilizer and dry compost, etc. - Page 9 6) Operate the operation lever of steel mesh wheel driving cylinder on the desired place, to contact the steel mesh wheel and the tire. 7) Operate the hydraulic motor lever and rotate the driving plate. 8) Run the tractor to spread fertilizer and dry compost, etc. - 7 -...
-
Page 10: Important Safety Information
5. Important safety information ① Before Operation 1) Read the manual and instruction on the machine carefully and learn how to use it properly 2) Wear simple clothes and safety device during operation. 3) When two or more people are working together, watch and check each other during operation. - Page 11 During Operation ② 1) Drive at a safe speed on a slope or unsafe road. 2) Make sure to put on the luminous sign during the night driving. 3) Turn off the hydraulic unit lever when driving on the road. 4) When the equipment malfunctions, turn off the engine first and check.
-
Page 12: Checkup
6. Checkup 1) Make sure to apply oil before operation and check the looseness of bolt and nut, etc. 2) Place the spreader on the flat surface and check if it balances (left and right) with the tractor. 3) Test-drive before operation to check if there is any error. 4) Check the air pressure of tires. -
Page 13: Trouble Shooting
8. Trouble shooting Symptom Inspection Response If the oil supply line has no problem, check if the hydraulic motor is Check if the valve of shaft is intact and working well the oil pipe is closed replace If loosened, fasten the Oil is leaking from the Check if the coupler joint joint. -
Page 14: Parts Sales & After Service
9. Parts sales & After service Parts sales 1) The parts list provided is in compliance with VIKING MODEL standards. Refer to this list when order any parts. 2) Follow next steps as below when order parts: ex) We would like to order 1 unit of Vane Model Number Description... -
Page 15: Certificate Of Quality Assurance
CERTIFICATE OF QUALITY ASSURANCE All products manufactured and sold by IRIS SPREADERS, Co. are designed and assembled in accordance with regulations on farm machinery under very strict quality management. If the product is managed and used in accordance with instructions on regular check-ups and maintenance schedule provided in the owner’s operation... - Page 16 ▶ On delivery the customer should check the censure that the machine has not been damaged in transit, and that it complies with that ordered as that it is complete with all the accessories as specified in the purchase contract. If it is found defective, a written complaint should be sent within 8 days of receipt of the same.
- Page 17 3) Any malfunction or defect caused by using unspecified fuel (low quality fuel or contaminated fuel) 4) Any malfunction caused by not complying with instructions prescribed in Owner’s Operation Manual or Warning Signs 5) Any defect caused by unauthorized modification of the product or use of non-genuine parts.
- Page 18 6. In case we upgrade the specifications of certain model, we do not have any responsibility to upgrade the already-sold-equipments. 7. TRANSFER OF WARRANTY Since we honor the remaining warranty time even after the transfer of ownership through sale or donation, it is very important to acquire the Certificate of warranty when transfer of the product takes place.
- Page 19 WARRANTY INFORMATION ○ In order for us to guarantee our highest quality on our products, we offer complimentary inspections designated agencies. malfunction occurs caused by manufacturing defect during warranty period, we will repair or replace the parts at free of charge. ○...
- Page 20 After Service Execution Report DATE PERFORMED TECHNICIAN CONFIRMED...
Need help?
Do you have a question about the VIKING-2000 and is the answer not in the manual?
Questions and answers