Advertisement
See Figure 15 for the mounting dimensions for the MSU.
F
15
IGURE
MSU MOUNTING DIMENSIONS
The AHR150A-2-A has a cable and six pin connector with a total length of 17.3" ± 0.3". The
interconnecting cable should consist of 3 #22 gauge twisted, shielded pairs. The AHR150A-2-A
cable connection is given in Error! Reference source not found. The minimum allowable bend
radius for the cable is 2.3" (minor axis). NOTE: There is no reverse or short circuit power
protection on the AHR150A-2-A. Failure to connect the device as defined in Error!
Reference source not found. will result in damage to the AHR150A-2-A, the host AHRU
supplying power to the AHR150A-2-A, or both.
The shielded cable can be extended to a maximum distance of 100 ft.
The mating connector for the AHR150A-2-A cable is D38999/24JB98SN or equivalent, with a
M85049/38S11 Strain Relief Clamp. See Figure 16 for the connector face views
OASIS Installation Manual
Advertisement
