Hitachi CP-DX250 Service Manual page 45

iv. Screw Torque must be confirmed to be 0.539-0.637 N-m. Screw Torque must be confirmed to be
Press Heat-sink when
assemble spring
screw
7.1.4.3 Assemble "CW Module" to "DMD HSG" and lock with screws well (Fig. Assemble "CW Module" to "DMD HSG" and lock with screws well (Fig.7-17). Assemble "CW Module" to "DMD HSG" and lock with screws well (Fig.
M3*4L Screw
7.1.4.4 Assemble "BKT Link Lamp & CW shield" on "DMD HSG" and then lock with screws ssemble "BKT Link Lamp & CW shield" on "DMD HSG" and then lock with screws ssemble "BKT Link Lamp & CW shield" on "DMD HSG" and then lock with screws
well (Fig. 7-18).
Fig. 7-16-1
Fixed shafts of DMD HSG Fixed shafts of DMD HSG
M3*5L Screw
○
1
○
4
Fig.7-17
Fig. 7-18
44
Fig. 7-16 16-2
BKT Link Lamp BKT Link Lamp
Shield CW
spring
screw
○
3
○
2