Resetting The Lamp Timer - Hitachi CP-DX250 Service Manual

12. Tighten the screw that secures the lamp door.
CAUTION
• Loose screw may cause a bad connection, which
could result in malfunction.
• Do not over tighten the screws.
13. Restart the projector.
CAUTION
Do not turn the power on with the lamp door removed.

6.3 Resetting the Lamp Timer

(After changing a new lamp, need to reset lamp timer.)
14. After the startup logo, open the On-Screen
Display (OSD) menu.
15. Go to the SYSTEM SETTING:
ADVANCED > Lamp Settings menu. Press
MODE/ENTER on the projector or remote
control. The Lamp Settings page is
displayed.
16. Press to highlight Reset lamp timer and press
MODE/ENTER on the projector or remote
control. A warning message is displayed
asking if you want to reset the lamp timer.
17. Highlight Reset and press MODE/ENTER on
the projector or remote control. The lamp time
will be reset to '0'.
CAUTION
Do not reset if the lamp is not new or replaced
as this could cause damage.
38