Basic Operating For Switching Modes - Hitachi CP-DX250 Service Manual

4.2 Basic Operating For Switching Modes

(1) Standby Mode： ： ： ：
When standby mode, system power consumption will be less than 0.5Watt.
If user wants to enter this mode, user can just plug in power cord. Power LED will show Red
for 1 sec then power LED show Purple.
(2) Download Mode： ： ： ：
This mode is applied for Download firmware.
If operators want to enter this mode, they should press and hold Power key and Mode key
together, then plug in power cord. Release the two keypads. Power LED will show red light
continuously. In download mode, you can use DLP composer lite program to download new
firmware.
Standby Mode
Download Mode
15