Initial Setup - La Crosse Technology 308-146 Instruction Manual

Heat Index | Dew Point ........................................................................ 7
MIN/MAX Values .................................................................................... 7
Multiple Sensors ..................................................................................... 7
Channel Scroll ........................................................................................ 8
USB Charge Port .................................................................................... 8
Restart ..................................................................................................... 8
Specifications .......................................................................................... 9
Position Station .................................................................................... 10
Position Outdoor Sensor..................................................................... 10
Care and Maintenance ........................................................................ 10
Warranty and Support ........................................................................ 11
FCC Statement ..................................................................................... 12
1. Insert 2 new AA batteries (not included) into the
TX142THv2 sensor. Observe the correct polarity. The red
LED will flash when transmitting.
2. Insert 3 new AA Alkaline batteries (not included) into the
station. Observe correct polarity.
3. After 5 minutes, place the sensor outside in a shaded
location. Maximum range is 300 feet (91 meters) open air.
308-146

Initial Setup

Channel
Select
www.lacrossetechnology.com/support
pg. 2