Table of Contents
Advertisement
Putting the RS 180 into operation
Music
Photos
Videos
Extras
Settings
Shuffle Songs
14
Connecting the transmitter to RCA sockets (output)
B
WARNING
Danger of hearing damage due to high volumes!
You can suffer hearing damage if you are using other Kleer
compatible headphones without integrated volume control,
such as the Sennheiser MX W1, with the TR 180 transmitter:
In this case, do not connect the transmitter to the RCA
sockets (output) of your sound source, but to the
headphone socket of your sound source.
Before putting the headphones on, set the volume on the
sound source to a low level.
Depending on your sound source, you have to change the setting of the
ATTENUATOR
switch
source.
Portable sound source
(MP3 player, mobile telephone)
Set the
ATTENUATOR
to "0 dB".
Plug the adapter for RCA sockets
Connect the red connector of the adapter
sound source.
Connect the white connector of the adapter
socket
L
of your sound source.
B
If your sound source has several RCA sockets, use the RCA outputs
(usually "Audio Out").
in order to optimally adjust the signal of the sound
Stationary sound source
(hi-fi system, amplifier)
switch
Set the
to "–8 dB".
onto the audio cable
to the red socket
0
ATTENUATOR
switch
.
R
of your
to the white or black
7
Hide quick links:
Advertisement
Table of Contents
