Sennheiser 502013 Instruction Manual page 28

You hear the sound only with one ear
Possible cause
Is the balance
adjusted correctly?
Is the transmitter
set to mono?
The sound of your sound source is hardly intelligible
Possible cause
Is the speech intelli-
gibility enhance-
ment out of adjust-
ment?
Is there another
transmitter
operating in the
proximity?
Is the receiver still
within the trans-
mitter's range?
The loudspeakers of your TV are muted
Possible cause
Some TVs have a
function that mutes
the loudspeakers
when you connect a
transmitter
If a problem occurs that is not listed in the above tables or if
the problem cannot be solved with the proposed solutions,
please contact your Sennheiser partner for assistance.
Solution
Turn the balance control
left or right (see page 16).
Set the ST/MO switch
transmitter to mono (MO)
(see page 16).
Solution
Press the "speech intelligibility"
A
button on the transmitter
repeatedly until the sound is
optimally adjusted to your
needs (see page 17).
Change the transmission channel
(see page 15).
Move the receiver closer to the
transmitter.
Solution
Via the operating menu of your TV,
check if and how the muting can be
deactivated.
Use a different audio socket on
your TV or use the MKE 800 TV-N
external microphone.
If a problem occurs ...
3
to the
D
on the
25