Adjusting Headband; Connecting The Headphones - Sennheiser 500643 Instruction Manual

8

Adjusting headband

In order to achieve good sound transmission and noise
damping, as well as the most comfort, adapt the
headband to your head size. You can adjust the
headband using the snap-in locking mechanism.
Wear the headphones so that the headband
across the middle of your head.
Adjust the headphones so that
– the ear cushion
– you feel slight pressure around your ears,
– the headband
Check in a loud environment whether the ear
cushions are optimally placed to ensure maximum
noise damping.

Connecting the headphones

Connect the audio cable
bushing of your sound source.
You will hear the sound from your sound source.
If the plug on the audio cable does not fit:
Use the adapter for 6.3-mm plug bushing
illustration to the left).
If you wish to use the headphones for the inflight
entertainment in an airplane:
Use the inflight adapter
left).
completely surrounds the ears,
is flat on the head.
to the headphone
(see illustration to the
runs
(see