Working With The Operating Menu - Sennheiser EM 2000 Instruction Manual

Using the operating menu
Display
Submenu "SK Settings" / "SKM Settings" / "SKP Settings"
Sensitivity
Low Cut
Auto Lock
Mute Mode
RF Power
Phantom Power48V
Cable Emulation
Exit
Submenu "Warnings"
Activates/deactivates warnings (color change and warning messages):
AF-Peak
Low RF Signal
RF Mute
TX Mute
RX Mute
Low Battery
Exit
Menu
Squelch
Easy Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
18
Function of the menu item
Adjusts the input sensitivity
Actives/deactivates the low cut filter ("SKM Settings" only)
Activates/deactivates the automatic lock mode
Sets the mode for the MUTE
Adjusts the transmission power
Activates/deactivates the phantom powering ("SKP Settings" only)
Emulates guitar cable capacities ("SK Settings" only)
Exits the submenu and returns to the submenu
Audio overmodulation
RF signal is weak
RF signal is too weak or no RF signal
• Transmitter is muted or
• no pilot tone
Receiver is muted
Charge status of the transmitter battery/the BA 2015 accupack is critical
Exits the submenu "Warnings" and returns to the extended menu
Menu"

Working with the operating menu

If the lock mode is activated, you have to deactivate it In order to be able to work
with the operating menu (see page 14).
By way of example of the
operating menu.
Changing from the current standard display to the operating menu
Press the jog dial.
The current standard display is replaced by the main menu. The last selected
menu item is displayed.
Selecting a menu item
Turn the jog dial to change to the
The current setting of the selected menu item is displayed:
Menu
PEAK
40 0
Easy Setup
-10
30
Frequency Preset
-20
20
Name
-30
10
-40
RF AF
switch ("SK Settings" and "SKP Settings" only)
"Sync
"Frequency Preset" menu, this section describes how to use the
"Frequency
B.Ch: 1. 1
Settings"
"Advanced
Preset" menu item.
Page
26
27