Software Interface Introduction; Qtouch Overview - BenQ QTouch User Manual

Software Interface Introduction

QTouch Overview

Open QTouch to enter full-screen mode. There are three modules on the display interface, shown as
below.
Operating Area
The green background is the operating area of the current page, and the toolbar interface in
transparency is underneath. The trash can is at the lower right corner. Generally, "Normal brush" is
in the default state, you can directly operate within the green area. In most cases, the operating area
of QTouch is in green. While in the case of the lower resolution as 1024×768, the working area is in
white.
Toolbar
Start QTouch to enter the main interface. Toolbar is at the bottom of the screen. The level one
toolbar is clean and simple with different function buttons.
Icon
Toolbar
Function
File
Operating area
Click to pop up the secondary toolbar to get the
functions.
Description
Introduction 7