Table of Contents
Advertisement
Transparent Page Mode
The transparent page mode in QTouch is similar to the control mode, but with a more powerful
function of transparent annotation. Under this mode, you can also use the brush or other functions
to make dynamic annotation to the current operation interface. You can only switch from the control
mode to the transparent page mode by clicking
in the floating toolbar.
Selection and Page Roaming State
Selection State
While touching the interface of QTouch, you need to switch between "drawing lines" and "select" to
distinguish whether the touch action is drawing lines or select. Click
in the main toolbar or the
floating toolbar, and it is in the select state. In this case, the touch action is not shown as "drawing
lines", but only as operation to the object.
Page Roaming State
The QTouch page is designed as the "infinite page". You can move the page randomly by switching to
the roaming state to get a bigger operation interface. Click
to enter into the page roaming state
under the full-screen mode.
is not in the default interface. Click
to retrieve the function.
12
Introduction
Advertisement
Table of Contents
