Enable And Disable Devices; To Enable/Disable Devices; Enable And Disable Range Configurations - Retrotec DM-2 Operation Manual

Pressure gauges

Hide thumbs Also See for DM-2:

Table of Contents

Mn Exhaust Fan Flow

Meter

3.2.1 Enable and Disable Devices

To simplify the device selection process, it is possible to disable devices that will not be used. Disabled

devices are saved in system memory, and will remain disabled upon subsequent uses. They can always

be enabled if necessary.

When you choose "No" for any one of the devices, you eliminate all the ranges as well. Each Device

can be enabled individually.

1. From the main gauge screen, press [Setup] to access the "Setup" menu.

2. Press [] or [] to select "Device Setup" in the list. Press [Enter].

3. Press [] or [] to select a device. Press [] or [] to toggle between "Yes" or "No" next

to each device. Selecting "Yes" for a device enables that device to be selected on the Main

Screen.

4. Press [Exit] to return to the "Setup" Menu, press [Exit] again to return to the Main Screen.

It is also possible to enable and disable Range Configurations for each of the Devices being used. This

will eliminate the need to scroll through each Range when pressing [Range Config] when it can be

Page 27 of 72

Mn TrueFlow Grid

Infiltec E3

Table of Contents