Table of Contents

Advertisement

7.

Mounting

As standard, the system has a clip for 35mm DIN rails according to DIN EN 60175.
For mounting the system please engage it onto the rail at the bottom side (see left picture), press it against the
spring force to the top (1) and then towards the mounting plate (2). The system latches as shown in the picture
at the right. Please refer to the above mentioned steps in reverse order to demount the switch.
As an option, a wall mount kit is also available. If the system should be fixed onto the wall, the clip for DIN rail
mount has to be unscrewed first.
ProfiHub F1 User Manual v1.0.1 | September 2018 | ©PROCENTEC
12/26

Advertisement

Table of Contents
loading

Table of Contents