Temporary Roof Anchors - Miller RA30-1 User Instruction Manual

.0 T M
The RA15-1, RA20-1, RA30-1 and RA35-1 roof anchors may only be used as temporary
anchor points and must not be used where permanent anchors are needed.
The RA15-1, RA20-1, RA30-1 and RA35-1 roof anchors are reusable anchorage
connectors designed to be repositioned as work progresses, provided that the roof
anchor has not seen fall arrest forces and has not been damaged in any way (refer to the
inspection section of this manual). It is recommended that new fasteners/hardware be
used each time the roof anchor is installed.
Product Photo
Us er In stru ctio ns - Engli sh
RARY Roof Anchors

Temporary Roof Anchors

Model No.
Reusable roof anchor with D-ring
Includes 10 roof anchors; each anchor
includes eight (8) #12 2-½ in. (63.5mm)
RA15-1
long steel pan head screws
Material: Steel (14 gauge) w/clear chro-
Reusable roof anchor
Includes 2 roof anchors; each anchor
RA20-1 includes eight (8) #12 2-½" (63.5mm) long
steel pan head screws
Material: Steel (14 gauge)
Reusable roof anchor with O-ring for
RA30-1 Includes twelve (12) 16d nails and six (6)
¼" x 2-½" (6.4mm x 63.5mm) lag screws
Materials: Steel, copper, nylon
surfaces
RA35-1 Includes six (6) 16d nails and three (3) ¼"
x 2-½" (6.4mm x 63.5mm) lag screws
Material: Steel
6
Description