Monnit MonnitLink Quick Start Manual page 2

• The iMonnit online software is now collecting your
sensor data.
Note:
Any change made to a sensor's settings will be downloaded to
the sensor on the next sensor heartbeat (check-in). Once a change
has been made and "Saved," you will not be able to edit that sensor's
configurations again until the sensor has downloaded the new setting.
If you want to force a sensor to download new settings, you can power
cycle the sensor by removing the battery, waiting 30 seconds, then
reinsert the battery.
Setting Up Sensor Notifications
• Notifications can be created, deleted or edited for any
sensor or group of sensors by clicking on "Events" in the
main menu.
Toggle On/Off Click to Open Detail View
• When creating a notification, you will need to select the
type of notification to create.
• Sensor Reading - Alert based on sensor reading or sensing
activity.
• Battery - Alert based on battery power remaining.
• Device Inactivity - Alert when a sensor has not checked in.
• Trigger Conditions - Set notification parameters such as
name, message and sensor conditions that will cause
the notification to be sent.
Monnit, Monnit Logo, MonnitLink and iMonnit are trademarks of Monnit, Corp.
© 2009-2015 Monnit Corp. All Rights Reserved.
• Actions - Select the user(s) to receive the notification
and click the arrow button to add them to the recipient
list. By default, email notifications are activated. Clicking
the notification delivery method icon toggles them on
and off (green is on, grey is off).
• Sent From - Assign devices (sensors and gateways) that
will cause the notification to be sent. When a notification
is sent from the system, it will automatically include the
device name and the data that caused the notification to
be sent. A single notification can be assigned to multiple
sensors or gateways.
• Devices to Notify - If you have a Monnit Control or
Notifier A/V on your network, you will see a "Devices to
Send Test Edit Delete Notify" tab. This allows the notification to interact with
these devices. Add a device and click the control icons
to toggle their settings.
Note: Control devices have two relays per device that are controlled
separately. You can turn a relay on, off or toggle the state. You can
also set a duration by clicking on the timer icon. This will perform the
selected toggle (on/off/toggle) for a set duration, then change back.
For more detailed instructions, documentation,
"how-to" guides and video demonstrations on using
Monnit wireless sensors, wireless gateways and
iMonnit software, visit our support page at
http://www.monnit.com/support/.
Monnit Corporation
4403 South 500 West
Murray, UT 84123
801-561-5555
www.monnit.com
MQS-023-2D (09/15)