Download Print this page

Sharp 701SH Manual page 25

Advertisement

Charging with AC adapter
When charging with AC Adapter (sold separately), carry out
the following operations.
1
Insert the Type-C plug of the AC adapter
horizontally into the USB Type-C connection
jack on the handset
2
Erect the AC adapter power plug and insert it
into an outlet
z The charging lamp illuminates and charging starts.
z When charging is complete, the charging lamp turns off.
USB Type-C
connection jack
Type-C plug
AC adapter
Charging lamp
3
When charging is complete, pull the AC adapter
power plug from the outlet and remove the
Type-C plug of the AC adapter horizontally from
the USB Type-C connection jack
Refer to user's guide of AC Adapter.
z
The shape of the plug for the AC adapter is for 100V AC (for
z
domestic use). To use the AC adapter of 100 to 240V AC
overseas, a conversion plug adapter applicable to your
country of stay is required. Do not use a voltage converter for
overseas travel to charge the battery.
Note that inserting or removing the equipment forcibly may
z
cause damage to the USB Type-C connection jack and the
Type-C plug or result in a malfunction.
Charging with DC adapter
The DC adapter (sold separately) supplies the power for
charging from a car accessory socket (12 and 24 V).
The DC adapter should only be used in negative grounded
z
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car
z
battery.
The DC adapter fuse is a consumable product. For
z
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
Refer to the user's guide of DC Adapter for details.
z
36
Before Using the Handset

Advertisement

loading