Care And Maintenance - Magnavox MD6949 Owner's Manual

AUX IN:
1. Insert one end of the Audio Connect Cable (not included) to the AUX Out; Line Out or Phones Jack on
the external Audio Player.
2. Insert the other end to the AUX IN Jack on the rear of unit.
3. Slide the Function Selector to CD/BT/AUX IN position to turn on the unit. The POWER Indicator will
illuminate and the unit will automatically switch to AUX IN mode.
4. Play the music on the connected external Audio Player as usual.
5. Turn the VOLUME Control Knob to adjust volume level as desired.
6. When finished listening, slide the Function Selector to OFF position to shut off the unit. The POWER
Indicator will turn off.
NOTES:
If the Audio Connection Cable was inserted into the AUX IN Jack, CD/BT will not function.
Disconnect the cable from the AUX IN Jack before use CD/BT.
Make sure the sound output level of the connected external Audio Player is in high level. Otherwise,
sound will be weak.
If sound is distorting, reduce the volume of the connected external Audio Player or set the EQ mode
of it to normal.

CARE AND MAINTENANCE