User Code Level: 6
User Code Level:
User Code Level:
User Code Level:
User Code Level:
Function: Bypasses and Resets loops prior to arming.
Function:
Function:
Function:
Function:
Bypass Loops is used to bypass individual loops from the alarm system. This is
usually done because the loop is inoperative. Bypassing means the alarm system
will not respond to any activity on the bypassed loop except that the loop name will
still appear in the Alarmed Loops list. A loop may be bypassed only while it is
disarmed. Since fire, panic, emergency, and supervisory type loops are always
armed they can never be bypassed. Bypassing may also be done during system
arming.
Bypass Loops can also be used to reset a loop, which has been bypassed, back
into the system. This can only be done while the loop is still disarmed. A bypassed
loop is automatically reset during system disarming.
When Bypass Loops is selected you will be asked to enter your code number.
When the code number is accepted you may enter the desired loop number and
bypass or reset it. A report of bypassed or reset loops can be transmitted to your
central station. This report is optional and is programmed during system installa-
tion.
BYPASS LOOPS
Step By Step:
Step By Step:
Step By Step:
Step By Step:
Step By Step:
1. Press the
COMMAND
BYPASS LOOPS?
BYPASS LOOPS?
2. When BYPASS LOOPS?
BYPASS LOOPS?
BYPASS LOOPS?
select keys. The display will read ENTER CODE: -
3. Enter your code number and press
LOOP: - RST BYPS
LOOP: - RST BYPS
LOOP: - RST BYPS
LOOP: - RST BYPS
LOOP: - RST BYPS
4. Enter the desired loop number and press
BYPS
to bypass.
5. The loop number will automatically disappear and a new loop number may
be entered in step 4.
key until
BYPASS LOOPS?
BYPASS LOOPS?
BYPASS LOOPS?
BYPASS LOOPS?
BYPASS LOOPS?
is displayed.
is displayed press any one of the top four
ENTER CODE: -
ENTER CODE: -
ENTER CODE: -
ENTER CODE: -
.
. The display will read
COMMAND
.
RST
to reset or
17
Need help?
Do you have a question about the 670 and is the answer not in the manual?