Loop Status - Security Command 670 User Manual

User Code Level: User Code Level: User Code Level: None
User Code Level: User Code Level:
Function: Displays a list of armed, bypassed, or alarmed loops; or checks the Function: Function: Function: Function:
status of individual loops.
Loop Status can be used to give you a list of loops by category or display the current
status of an individual loop number. The three categories are:
1) Armed Loops; loops which are currently armed.
2) Bypassed Loops; loops which are currently bypassed.
3) Alarmed Loops; loops which have tripped during the current
or previous armed period.
When Loop Status is selected you will be asked which kind of display you want to
see. If you choose one of the three categories, the list of loops in that category will
follow immediately, including loop number and name. If you choose to enter an
individual loop number you will be asked for the specific number then the loop name
and status will be displayed.
Step By Step: Step By Step: Step By Step: Step By Step: Step By Step:
1. Press the key until LOOP STATUS?
COMMAND
2. When LOOP STATUS?

LOOP STATUS?

LOOP STATUS? LOOP STATUS? LOOP STATUS?
select keys. The display will read ARM
16
LOOP STATUS
LOOP STATUS? LOOP STATUS? LOOP STATUS? LOOP STATUS? is displayed.
is displayed press any one of the top four
ARM ARM ARM BYPS ARM BYPS BYPS BYPS BYPS ALR ALR ALR ALR ALR NBR NBR NBR NBR NBR .
ARM
3. Press for a list of loops which are currently armed.
BYPS
Press for a list of loops which are currently bypassed.
ALR
Press for a list of loops which have tripped during the current
or previous armed period.
NBR
Press and LOOP: - LOOP: - LOOP: - LOOP: - LOOP: -
4. If NBR is selected enter the desired loop number and press
The loop name will be displayed followed by its current status:
-OKAY = loop in normal condition
-BYPAS = loop is bypassed
-BAD O = loop is open
-BAD S = loop is shorted
5. After displaying the loop status the display will return for another loop number.
will be displayed.
COMMAND