Advertisement
5.
OPERATING INSTRUCTIONS
WARNING! Ensure you read, understand and apply safety instructions before use.
5.1.
Only use impact sockets which are specifically designed for use with an impact wrench.
5.2.
Connect the wrench to the air hose as in Section 3.
5.3.
Place the socket over the subject nut and depress the trigger to operate the wrench.
5.4.
To change drive direction turn the direction control lever to the desired direction (fig.3).
DO NOT change direction whilst the wrench is running.
5.5.
The speed may be adjusted in forward or reverse gear by adjusting the speed control (fig.3).
There are two speed settings in both forward and reverse. DO NOT adjust speed or direction
whilst the wrench is running.
DO NOT use any additional force upon the wrench in order to remove a nut.
DO NOT allow wrench to free run for an extended period of time as this will shorten
its life.
WARNING! Disconnect wrench from air supply before changing accessories, servicing or
performing maintenance. Replace or repair damaged parts. Use genuine parts only.
Unauthorised parts may be dangerous and will invalidate the warranty.
6.
MAINTENANCE
6.1.
If the air system does not have an oiler, lubricate the air wrench daily with a few drops of
Sealey air tool oil dripped into the air inlet.
6.2.
Clean the wrench after use. DO NOT use worn, or damaged sockets.
6.3.
Loss of power or erratic action may be due to the following:
6.3.1. Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or type
of hose connectors. To remedy, check the air supply and follow instructions in Section 4.
6.3.2 Grit or gum deposits in the wrench may also reduce performance. Remove the strainer,
clean it and flush the wrench out with gum solvent oil or an equal mixture of SAE No: 10 oil
and paraffin. Allow to dry then lubricate before use.
6.4
For a full service, contact your local Sealey service agent.
6.5
When not in use, disconnect from air supply, clean wrench and store in a safe, childproof
location.
fig.2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
W e b
sales@sealey.co.uk
01284 703534
email
SA687 Issue: 2(I) - 24/04/13
fig.3
Advertisement
