Ericsson T60c User Manual page 78

Hide thumbs Also See for T60c:
Table of Contents

Advertisement

Note! The Off setting is active until you choose a differ-
ent setting. Fax On and Data On apply until you
power off your phone.
7 Press
to select the highlighted call type.
< ( 6
8 'DWD)D[ 6HWWLQJ[[ appears in the display. Your
phone is now configured to a specific type for your
next incoming call.
Making Data and Fax Calls
When your phone and computer are properly set up, you
can send a fax, or initiate data calls, as with any other
modem.
Review the instructions from your mobile service
provider that describe the procedures and rules for
making and receiving data calls in your area.
Note! To avoid unnecessary airtime charges, terminate
your data calls as soon as you have finished trans-
ferring files by pressing the
key.
1 2
Making Data and Fax Calls
Making Voice Calls While Connected to
Your Computer
You can originate voice calls when you are not on a data
call. You can receive voice calls if 'DWD)D[ is set to Off.
Your Ericsson mobile phone enables you to initiate voice
calls from Windows applications when connected to the
Ericsson Voice Call Dialer. This is particularly useful if
you have contact cards with phone numbers in a contact
management application. You can open a contact card,
click on the phone icon, and originate a call using your
Ericsson mobile phone. Then you simply pick up your
mobile phone and continue the call. The Ericsson Voice
Call Dialer is compatible with most contact manager
software packages. Refer to the "Installing the Modem
Driver (INF File)" section at the end of this chapter for
help with installing this driver for some operating
systems.
Disconnecting
Disconnect your Ericsson mobile phone from your
computer by disconnecting the cable from your phone
and the serial port from your computer.
73

Advertisement

Table of Contents
loading

Table of Contents