Using The Device; Using Wi-Fi; Using Celluar; Using Bluetooth - Xplore DT-10 User Manual

Using the Device

Using Wi-Fi

To connect to a WLAN:
1. Select Start
2. Slide the Wi-Fi On/Off button to the On position.
3. Select an AP from the list, and click Connect.
4. Input the network key when prompted.
Using Cellular
To connect to a cellular network:
1. Power off the device.
2. Insert a SIM card into the SIM card slot.
3. Power on the device.
4. Select Start
5. Click the celluar network, and select Advanced options.
6. Click + to add an Internet APN, and save the settings.

Using Bluetooth

To connect to a Bluetooth Device:
1. Select Start
2. Slide the Bluetooth On/Off button to the On position.
3. Select a device from the list, and click Pair.
4. Enter the passcode to pair.
7
> Settings > Network & Internet > Wi-Fi.
> Settings > Network & Internet > Cellular.
> Settings > Devices > Bluetooth.