Other Information - JVC KD-T905BTS Quick Start Manual

8 Press to exit the setting menu.
Note:
For KD-T900BTS/KD-TD90BTS/KD-T700BT/KD-TD70BT/KD-SR85BT, you need
to set [SPK/PRE OUT] to [REAR/SUB.W] or [SUB.W/SUB.W] before you can make the
subwoofer level settings.
Illumination Color Setting
For KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS, you can set your
preferred illumination color for each zone.
1
Press and hold to enter menu settings.
2 Turn the volume knob clockwise to select [COLOR], then press the knob.
3
Press the volume knob if [PRESET] is shown on the display.
4
Turn the volume knob to choose a zone ([ALL ZONE], [ZONE 1], [ZONE 2]),
then press the knob.
8
5 Turn the volume knob to choose a color, then press the knob.
• [COLOR 01] to [COLOR 49]
• [USER]: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• [COLOR FLOW01] to [COLOR FLOW03]: Color changes at
different speeds.
• [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/
[RELAX]/[SUNSET]: The selected color pattern is
shown. (Selectable only when [ALL ZONE] is selected
in step 4.)
6 Repeat step 4 and step 5 to set color for other zones.
7
Press to exit.

OTHER INFORMATION

For playback operations of AUX, SPOTIFY, Pandora®, iHeartRadio®,
SiriusXM® Radio sources, refer to the INSTRUCTION MANUAL on the
following website: <http://www.jvc.net/cs/car/>
• The availability of each source vary depending on the model.
Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery