Using Mp3 Program - Samsung MY-MP200 Instruction Manual

Using MP3 program

• When the MP3 Player is off and the connection cable is disconnected while using this program,
an error may occur. If this happens, turn off the MP3 Player and turn it on again, make the correct
connection, and run this program again.
• If you stop this program during the downloading or uploading of a file, an error will occur.
Select "REFRESH" menu to initialize the program, and reconnect the communication.
To copy files from MP3 Player to PC
To delete selected file
Press the right
button of the mouse,
then the menu
window will open.
To delete the
selected file
To finish all jobs
and exit the program
To move to
Option screen
* Communication: When error occurs, to set "Standby Time" (Unit: millisecond (1 sec. = 1000 millisecond)
Not used
Standby time at initial
connection
When reading data by PC
When writing on MP3 Player
When deleting files
Not used
Check these when the
computer supports
ECP mode
MP3 PLAYER
Data transmission progress window
To copy files from PC to MP3 Player
To stop the current job
To select options to see files in the File Window
File Window
To copy files from PC to the Flash Memory of MP3 Player
To copy files from MP3 Player to PC
To delete all the data on the Flash Memory of MP3 Player
To stop all the current jobs
To restore the updated data on PC or MP3 Player
To adjust the screen font of the program
To select options to show files in the File Window
To show the files stored in the
MP3 Player
To show the progress of file
copying
When erasing all the data on MP3 Player
To backup files
To update files
To read file information
Not used
Not used
Not used
9