Internet Features; Connecting Your Equipment; If Your Wi-Fi Connection Did Not Start Automatically - SAGEMCOM LaBOX Manual

Internet Features

Connecting your equipment

Wi-Fi connectivity gives you mobility while eliminating the need for cables. Note: Although
wireless networks now allow for high-speed connections, they cannot match the stability,
security and performance of a wired Ethernet connection.
You can enable/disable your Wi-Fi automatically by pressing the Wi-Fi button (A).
Press the WPS button (B) to connect your Wi-Fi compatible devices without entering your
password.
A
WI-FI
WELCOME
B
WPS
• You can also connect your equipment by using your BOX's network name and
security key.
Your network name and security key are displayed on the sticker under your BOX and in the
Settings/Equipment/WiFi menu of LaBOX.
1. Select your Wi-Fi network name the wireless network list.
2. Enter your Wi-Fi security key (WPA/PSK – WPA2/PSK). Please respect uppercases.
MODEM: XXXXXXXXXXXX
EMTA: XXXXXXXXXXXX
CA S/N: XXXXXXXXXXXXX
S/N SGM: XXXXXXXXXXXX
Configuration Réseau Wi-Fi
Nom du Réseau (SSID)
XXXXXXXXXXXX
Clé de sécurité
XXXXXXXXXXXX
• LaBOX Monaco Telecom
32
CS 50001
92848 RUEIL CEDEX - FRANCE
EGCI384 MT 263654539- B01
Configuration Modem
http://mygateway ou
http://192.168.1.1
Login: admin
Password: XXXXXXXXXXXX

If your Wi-Fi connection did not start automatically:

1. Go to the user interface.
• Open your internet browser and type in the following address: http://192.168.100.1
• On the welcome page, press Set your gateway.
• Enter «admin» as Username and the security key of your BOX as Password. Press Login.
(See previous page)
Mon modem
192.168.100.1/accueil.html
Identification by password
Username: admin
Password:
Login
Check the label under your gateway for username and password
Identification by button
Continue
Press 5 seconds on the WPS button on your box until the power button blinks and click Continue
• Or press the WPS button (B) for a few seconds and press Continue
• More informations on assistance.monaco-telecom.mc You can now setup your access in
the Security tab.
Mon modem
192.168.100.1/securite-pb1-identi ant.html
NETWORK WIFI VOIP
MENU SECURITY / BASIC SETTINGS / USER & PASSWORD
User:
LANGUE English
Re-enter user:
Home
Password:
Basic Settings
Re-enter password:
IDENTIFIANT & MOT DE PASSE
Mac adress filtering
Restore Factory Defaults:
URL filtering
Advanced Settings
IMPORTANT
Button below allow you to reboot your
gateway without loosing your custom
settings.
Reboot Gateway
In case of error, you can fully reinitialize
your modem by clicking to button below.
Mon modem
192.168.100.1/accueil.html
Langue English
Set your Gateway
Mode: Routeur
DHCP: Enable
Your IP adress IP: 88.209.105.206
Your subnet mask: 255.255.248.0
Your default gateway: 88.209.104.1
Your DNS: 195.78.26.210 et 195.78.26.211
Network Status: Connected
Maximum downstream datarate: 2000 Mbps
Maximum upstream datarate: 200 Mbps
WiFi Status 2,4 GHz: [sc-7E50] Enable
WiFi Status 5 GHz: [sc-7E50_5GHz] Enable
Guest WiFi Status 2,4 GHz: [sc-7E50_Guest] Disable
VoIPStatus: Line 1 Status: On hock
Standard Specification Compliant: EuroDOCSIS 3.0
Hardware version: 1.0
Software version: MT-PC20_3.345.0-T1
Cable MAC adress: 40:65:a3:06:7e:50
Device MAC adress: 40:65:a3:06:7e:52
CM Certificate: Installed
System Up Time: 2 Jour(s) 21h:29m:43s
Current Time: Lun 13/Juin/2016 9:16:9 GMT+0200
SECURITY BACKUP LOGOUT
Display the password
Display the password
Yes No
Apply
EN
EN •
33