Installation Instructions; Uninstall - Nayax VPOS Touch Manual

6 Installation Instructions
There are two installations' options: inside and outside the machine door.
Option 1 ‐ Installation inside the machine
In the event the machine has a window in the door in which the VPOS Touch can be
placed:
1. Open machine door
2. Remove the window
3. Remove the bolts
4. Place the provided plastic plate on machine door
5. Replace the bolts on the plastic plate
6. Place the VPOS Touch on the window from outside
7. Screw the screws from the inside while securing the VPOS Touch
8. Connect the cable ‐ click it in
Option 2 ‐ VPOS Touch installed outside the machine door
In the event the machine doesn't have a predefined location for installation of a card
reader:
1. Select a flat location for the installation
2. Drill 4 holes into the machine door using the plastic plate for the screws
3. Drill a hole into the machine door of minimum 14 mm for the cable
4. Open machine door
5. Place the VPOS Touch on the door
6. Screw the screws from the inside while securing the VPOS Touch
7. Connect the cable ‐ click it in
General Note: Screw is
6.1 Uninstall
Warning: When un‐plugging the VPOS Touch connector, you must press both sides of
the releasing bridge in the same time to avoid damaging the releasing bridge.
Proprietary of Nayax © All rights reserved
VPOS Touch Manual
, use tightening torque = Level 3.
Phillips M4
Page 10