Craig CMA3707 Owner's Manual page 6

AUX IN:
To listening from the external Audio Player such like MP3 Player, Discman...etc.
1. Slide the POWER ON/OFF Switch on the rear of unit to ON position to power on the
unit, the POWER Indicator on the top of unit will illuminate and blink.
2. Connect one end of the supplied Audio Connection Cable to the AUX Out / Line Out /
Phone Jack on the external Audio Player.
3. Connect the other end of the cable to the AUX IN Jack on the rear of unit as illustrated
follows. The unit will turn to AUX IN mode automatically.
TO AUX IN JACK
AUX IN
DC IN
4. Play the music on the connected Player as usual. (Make sure the volume level of the
connected Audio Player is turned to high level.)
5. During playback, press and release the
volume level as desired.
6. When finished listening, slide the POWER ON/OFF Switch to OFF position to turn off
the unit.
IMPORTANT:
If the Audio Connection Cable is inserting into the AUX IN Jack, Bluetooth can NOT be
use. Unplug the Audio Connection Cable from the AUX IN Jack before use Bluetooth.
or Buttons repeatedly to adjust
5