Sony CFD-ZW755 Service Manual page 5

All manuals and user guides at all-guides.com
Playing a tape
2 1
For hookup instructions, see pages 26 – 28.
1
Press p6 to open the tape
compartment and insert a
recorded tape. Use TYPE I
(normal) tape only. Close the
compartment.
With the side you want
to play facing you
2
Press (.
The player turns on ( direct
power-on) and starts playing.
8
Basic Operations
Recording on a tape
2
For hookup instructions, see pages 26 – 28.
1
Press p6 to open the tape
compartment on deck B and
insert a blank tape. Use TYPE I
(normal) tape only.
With the side you want to
record on facing you
2
Select the program source you
want to record.
To record from the CD player:
insert a CD (see page 4) and press
CD.
To record from the radio:
tune in the station you want (see
page 6).
To record from the tape (dubbing):
insert a recorded tape into deck A
and press TAPE until "dUb"
appears in the display.
10
Basic Operations
2 1
Display
3 1
Display
– 5 –
Use these buttons for additional operations
POWER
Note
To
During playback, do not
adjust the volume
press buttons on the
other deck. Otherwise
the playback speed may
stop playback
change.
fast-forward or rewind the tape Press ) or 0.
Tip
pause playback
Next time you want to
listen to a tape, just
press (. The player
turns on automatically
eject the cassette
and starts playing the
turn on/off the player
tape.
3
Deck B
Start recording.
To record from the CD player and
the radio, press r on deck B ((
is depressed automatically).
To record from the tape, press r
Deck A
on deck B ((is depressed
automatically). Then press ( on
deck A.
Tips Use these buttons for additional operations
• Adjusting the volume or
the audio emphasis (see
POWER
page 25) will not affect
the recording level.
• For the best results, use
the AC power as a
power source.
• If the AM program
makes a whistling
sound after you've
r
pressed in step 3,
press MODE repeatedly
until the noise at a
minimum.
To
stop recording
pause recording
turn on/off the player
To erase a recording, proceed as follows:
1 Insert a tape whose recording you want to erase into deck
B.
2 Press TAPE untill "TAPE" appears in the display.
3 Press r on deck B.
0, )
p6
P
VOLUME
0, )
p6
P
Do this
Turn VOLUME (Press
VOL +, – on the remote).
Press p6.
Press P.
Press the button again to
resume play after pause.
Press p6.
Press POWER.
9
Basic Operations
MODE
p6
P
Press
p6 on deck B
P on deck B
Press the button again to
resume recording.
POWER
11
Basic Operations