Download  Print this page

Sanyo MCD-Z100F Instruction Manual page 6

Hide thumbs

Advertisement

TRACK
NO
c1
/:/
/:/
o
CD PLAY
/
/
c) REPEAT
.-
0
MEMORY
The TRACK
NO. display
will show the total
number
of tracks
on the disc as shown
be-
low.
E
NOTES:
-
If a disc is loaded
upside
down,
or if no
disc is loaded,
the CD player will not op-
erate.
-
Opening
the CD compartment
lid while a
CD is playing
could scratch
the disc. Al-
ways press the STOPICLEAR
button
and
wait for the disc to stop rotating
before
opening
the CD compartment
lid.
Compact
discs
Both 8cm and 12cm discs can be played in
this unit.
NOTE:
Place only one disc at a time in the CD
compartment.
Only discs bearing the logo as shown can be
played in this unit.
~iwi
DIGITAL
AUDIO
Always
place the compact
disc in the CD
compartment
with the label facing up. Com-
pact discs can be played on only one side.
Fingerprints
and
dust
should
be carefully
wiped off the disc's signal surface
(opposite
the label side) with a soft cloth. Gently wipe in
a straight
motion from the inside to the out-
side of the disc.
Discs
should be returned to their cases after
use to avoid serious
scratches
which could
cause the player to skip.
Do not expose a disc to direct sunlight,
high
humidity,
or high temperatures
for extended
periods of time to prevent warping the disc.
Do not apply paper or write anything on either
side of the disc. Sharp writing instruments,
or
the inks used in some felt-tip pens, may dam-
age the surfaces of the disc.
Do not use cleaners
or antistatic
sprays on
discs, such as those
used for phonograph
records
IMPORTANT
NOTE
If an abnormal
display indication,
or an operat-
ing
problem
occurs,
disconnect
the
mains
lead. Remove the D batteries.
Wait at least 5
seconds, then reconnect the mains lead. Rein-
stall the D batteries.
-5-

Advertisement

loading

  Also See for Sanyo MCD-Z100F

  Related Manuals for Sanyo MCD-Z100F