Chapter 02. How To Set Up Your Magicsing; How To Connect To A Tv; Et21Kv Main Station; How To Connect To A Tv & Stereo (Sound System) - Magicsing ET21KV User Manual

How to Set up Your MAGICSING - Chapter.02

HOW TO CONNECT TO A TV

HOW TO CONNECT TO A TV
Television Television
AUDIO CABLE (RCA) AUDIO CABLE (RCA)
INPUT PORT I AUDIO L / R & VIDEO IN INPUT PORT I AUDIO L / R & VIDEO IN
1. Connect the Audio / Video cable to the RCA jack terminal on your TV, 1. Connect the Audio / Video cable to the RCA jack terminal on your TV,
as shown above. If there are only two RCA jack terminals on your TV as shown above. If there are only two RCA jack terminals on your TV
(mono TV), connect the yellow jack (male) to the yellow RCA jack terminal (mono TV), connect the yellow jack (male) to the yellow RCA jack terminal
and connect the white jack (male) to the other RCA jack terminal of your TV. and connect the white jack (male) to the other RCA jack terminal of your TV.
※Please turn off the function "Automatic Volume Levelling" (AVL / AVC) on ※Please turn off the function "Automatic Volume Levelling" (AVL / AVC) on
your television set. your television set.
HOW TO CONNECT TO A TV & STEREO HOW TO CONNECT TO A TV & STEREO
Stereo ( Sound System ) Stereo ( Sound System ) Television Television
1. Connect the yellow jack to the yellow RCA terminal on your TV. Connect 1. Connect the yellow jack to the yellow RCA terminal on your TV. Connect
the red and white jack to jack terminals on your stereo (sound system). the red and white jack to jack terminals on your stereo (sound system).
You might need an extension cable if your stereo (sound system) You might need an extension cable if your stereo (sound system)
- -
is placed is placed far away from your TV. far away from your TV.

ET21KV Main Station

ET21KV Main Station
AUDIO L / R & VIDEO OUT AUDIO L / R & VIDEO OUT
(SOUND SYSTEM) (SOUND SYSTEM)
ET21KV Main Station ET21KV Main Station
|
CHAPTER. 02
01
VER.100
Chapter.02 - How to Set up Your MAGICSING
HOW TO CHANGE THE BACKGROUND VIDEO HOW TO CHANGE THE BACKGROUND VIDEO
USING OTHER VIDEO SOURCES USING OTHER VIDEO SOURCES
EXT. VIDEO OUT EXT. VIDEO OUT
1. Connect the video cable to the VIDEO OUT jack terminal on other optional 1. Connect the video cable to the VIDEO OUT jack terminal on other optional
video sources ( VCD, DVD,VIDEO ) . video sources ( VCD, DVD,VIDEO ) .
2. Connect the other side of the video cable to the VIDEO IN jack terminal of 2. Connect the other side of the video cable to the VIDEO IN jack terminal of
MAGICSING. MAGICSING.
[MODE + 0] [MODE + 0]
3. Press 3. Press
on the mic or on the remote control to use other video on the mic or on the remote control to use other video
sources as background by setting "EXT.VIDEO INPUT" on the "configuration sources as background by setting "EXT.VIDEO INPUT" on the "configuration
menu". menu".
HOW TO CONVERT [ PAL ] OR [ NTSC ] MODE OF TV
1. To convert to PAL mode, turn off the mic first.
Press and hold button [8] on the mic, and then press the [ POWER ] button
using another finger until the word "PAL" appears on the TV screen.
(Do not release button [8] and the [ POWER ] button until the word "PAL"
appears on the TV screen.)
2. To convert to NTSC mode, turn off the mic first.
Press and hold button [9] on the mic, and then press the [ POWER ] button using
another finger until the word "NTSC" appears on the TV screen.
(Do not release button [9] and the [ POWER ] button until the word "NTSC" appears
on the TV screen.)
|
02 CHAPTER. 02
VER.100
VIDEO IN | VIDEO OUT VIDEO IN | VIDEO OUT