Recording - Magicsing ET21KV User Manual

Functions & Settings - Chapter.04
2

RECORDING

Use this function to record your singing(VOICE with the MUSIC) and to
playback your recorded singing performance.
1. RECORDING TO THE MEMORY IN THE MAIN STATION 1. RECORDING TO THE MEMORY IN THE MAIN STATION
In case of no SD card and/or Recording Pack on the main station, In case of no SD card and/or Recording Pack on the main station,
follow the procedure below. follow the procedure below.
How to Use:
1) Select a song.
①
2) Press [ ] the remote control to start
recording ( ① ).
3) To stop : Press
4) To do playback :
Press [▶] on the remote control ( ② ).
②
5) To stop the playback : Press
※ A song recorded less than two seconds will not be recorded.
※ You can record a song of up to five minutes long.
[approximately for 1(one) song]
2. RECORDING TO AN SD CARD AND/OR RECORDING PACK 2. RECORDING TO AN SD CARD AND/OR RECORDING PACK
You can record your own singing into an SD card or a Recording Pack. You can record your own singing into an SD card or a Recording Pack.
If both the SD card and Recording Pack inserted at the same time, If both the SD card and Recording Pack inserted at the same time,
you need to decide which one to use. you need to decide which one to use.
(The recording pack looks exactly the same as an additional song pack (The recording pack looks exactly the same as an additional song pack
but contains no songs and its data is replaceable.) but contains no songs and its data is replaceable.)
How to Use:
1) Insert an SD card or Recording Pack
before turing on the main station.
2) Select a song.
3) Press [ ] under the "RECORD" section
on the remote control to start recording
4) To stop, press
5) To see the list of the recorded songs, press
6) To play back the song, choose a recorded song first by pressing
[ ▼ ] [ ▲ ] [ ◀ ] [ ▶ ]
on the remote control. After selecting the song
[▶/■]
the song, press on the remote control.
[▶/■].
7) To stop the playback, press
8) To delete a recorded song, choose the song and press [RES].
[▶/■]
.
[▶/■]
.
[▶/■]
.
[▶] the remote control.
|
CHAPTER. 04
03
VER.100
Chapter.04 - Functions & Settings
9) Chain Recording
To record multiple songs nonstop choose the songs you want to record
and reserve them. Next press the "Chain Recording" button to start
singing & recording.
Consecutively all reserved songs are played and recorded in order.
10) Chain Replay
To play multiple recorded songs select the song you want to play first
from the list. All recorded songs are replayed and stopped by the end
of the list.
※ You can't record your singing to an SD card when MOVING PICTURES
are playing.While an SD card or Recording Pack is being used,
your singing cannot be recorded on the main station memory.
※ When an Additional Song Pack is used on the main station, songs recorded
from the Additional Song Pack can be played or deleted too.
※ You cannot record your singing performance in the middle of the song.
Therefore, even if you press [ ] on the remote control while singing a song,
●
the song stops, restarts, and then the recording takes place.
Settings such as tempo or key should be set in advance as these cannot
※
be changed while the song is being recorded. Also, during the recording,
certain functions such as continuous play or pause are not available.
Recording time
※
1. Recording Pack : About 180 minutes (NAND 1Gb)
2. SD card : About 60 Hours (2GB)
(In case there is no files on the SD card)
3. HOW TO SET UP A RECORDING PACK & AN ADDITAONAL SONG PACK
CAUTION: TURN THE POWER OFF FIRST.
It is very important to power off first before removing or inserting a
recording pack or an additional song pack
1. Locate the back cover of main station. Open the back cover.
2. The arrow on the top of a recording pack or other packs should be
pointing towards the main station head. Insert any pack into one of
the 6 slots in the back of the main station and carefully press it.
A click sound indicates that it is properly inserted.
3. Close the back cover. Turn the power on.
|
04 CHAPTER. 04
VER.100