Table of Contents
Advertisement
7
C
AMERA
You phone comes with a camera. Before using
your phone's camera, here are some tips:
• You cannot activate the camera while on an
active call or while browsing files in the media
gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera for photos" on this
page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Take a picture
To take a picture:
1. Activate the camera one of the following
ways:
– Press the
Camera
beeps.
– Select
>
Menu
2. Focus on the image using the phone's display
as a viewfinder. Scroll up or down to zoom in
and out.
26
key until you hear two
.
Camera
3. Take a picture one of the following ways:
– Press the
OK
– Press the
Camera
– Select
Capture
The picture is saved to your Camera Pictures.
4. Select
to create a multimedia message
Send
or
to delete the picture from your
Erase
phone.
5. Press the
key to exit camera mode.
End
Camera mode options
You can set up how your camera takes pictures.
While in camera mode, select
the following:
•
displays the following settings you
Settings
may set up prior to taking a picture:
–
sets the flash. Options are
Flash
,
Automatic
On
–
adjusts the resolutions.
Resolution
–
Low Light Mode
low light environments.
–
sets a self timer. Options are
Self Timer
(default) or 3, 5, or 10 second pauses.
Off
When set, the camera beeps from 3
seconds down to the time the shutter
snaps the picture automatically. Self Timer
is not available when Multishot mode is
activated.
key.
key.
.
and one of
Options
, or
.
Off
brightens the picture for
Take a picture
Advertisement
Table of Contents
