Blue Yeti Nano Quick Start Manual page 2

GETTING STARTED WITH YETI NANO
After unpacking your Yeti Nano, rotate the
microphone 180 degrees so that the Blue logo
and headphone volume control are facing you.
Adjust the microphone to your desired angle,
then tighten the set-screws on the left and right
of the base. Connect Yeti Nano to your computer
with the supplied USB cable—the headphone
volume button will light up, indicating power has
reached the mic.
Yeti Nano is a side-address microphone, which
means you should speak, sing, and play into the
front (not top) of the microphone while facing
the Blue logo. Now you can start recording and
streaming in stunning audio quality.
2