Hose And Electrical Connections - Jacuzzi J-DREAM Owner's Manual

J-Dream Owner's Manual
Attach Hoses for Hot and Cold Water Lines and Control Cable, Ground Wire
The hoses are marked to indicate where they are to be tied on the side of the back wall. This is to allow the proper
slack when the hinged seat wall is swung open (like a door) to access equipment. The hot and cold water lines are
to go behind the steam line. Connect lines A, B, and C at the corresponding letters on the mixer. Also connect hot
and cold water supply hoses. Connect control cable. Connect ground wire (yellow with green stripe) to terminal on
mixer valve.
Bond wire
Bonding post
Line C (use hot water
to soften the hose to
ease installation over
the barbed fitting)
Bond wire from seat wall to
be clipped to mixer here
Line A (with braided
metal sheathing)
Line B (use hot
water to ease
connection)
Cold Water Line (with
braided metal sheathing)
Hot Water Line (with
braided metal sheathing)
C
B A
Control
Cable
C
C
B A
A
B
21