Door Frame - Jacuzzi J-DREAM Owner's Manual

J-Dream Owner's Manual
Attach Door Frame to Angle Brackets and Base Frame
Before proceeding, make sure the seat wall is closed and fastened. Align door frame over tabs on base frame
and pan lip. The pan lip fits into corner the posts of the door frame. Align holes along sides of door frame with angle
bracket and mark this position of the angle bracket (Illustration A). Remove door frame and angle bracket screws.
Apply the silicone caulk and reinstall the angle bracket at the marked position. Insert screws and tighten. Reposition
the door frame and install screws through angle bracket into door frame post. Then install bolts (2) through frame tabs
into door frame (Illustration B). Do not overtighten. Do not caulk the angle brackets to the door frame as they must
be removed to allow service access to equipment.
Panel #1
A
B
19
A
Enclosure
Post
E
Screw (3)
Panel #1
Angle Bracket

Door Frame

B
Enclosure
Washer (2)
Post
Base Frame Bolt (2)
I
H