How To Thread Woolly Nylon/Polyester Thread - Kenmore OVERLOCK 3/4D 385.16631 Owner's Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Lower
ooper
tnreaa
guide (1
¢
Lower
looper threat
tension dial
f_ Insert the thread between tension
discs from the right. Then pull
both sides of the thread firmly
between tension discs.
(_ Pass the thread through lower
looper thread guide (1).
\
LOWel
!oooer
thread
guide (4)
thread gui
Lower oopef Loooar threac
6_ (_ (_ tnread guide (3)take-up lever uower_
Lowe_
looper _,'k.%.-'_
thread _X,_ "_'_._
{side(5)
Slb_
_.-#_
Looper
Th,ead "\ I_ _J_X
Looper _.
threader_
Thread ._-_
Loooer
[r]r_aoer
Lower OODer _
Tweezers
(_ Pass the thread through ower looper thread 1_ Turn the _and wheel toward ,_ Pull !_e threader to aass the
guide (2).
(_) Pass the thread through the looper thread
take-up lever (lower).
(_) Pass the thread through lower looper thread
guides (3) and {4).
you until the lower looper
comes to the right, and pass the
threader through hole on lower
looper thread guide (5).
Hook the end of threao on the
threader. (See Note.}
thread through the hole of
lower looper thread guide (5).
Remove the thread frorr the
threader, and draw the thread
through the hole on lower
looper to the back 10 cm (4")
or more with a pair of tweezers.
Thread
Z
/
/
Tension d_ses
* Make sure that the thread is between
the tension discs.
NOTE: If you remove the needle olate, the threading points
of lower looper are easier to see.
In this case, make sure the thread is not caught by the
needle plate when replacing the plate after threading.
NOTE: How to Thread Woolly Nylon/Polyester Thread.
Lower ooDer
@ / @ @
©rdinar. WoolIv n', on!pb _ ester -qreao
[rlreao
* Shown above is one of the easiest ways to pass woolly nylon!
polyester thread through the needle.
* Use the same method for the upper Iooer,
11